Here you will find tips on how to install your new appliance. Be aware that installation methods and measurements may vary from model to model. It's important to check the installation manual for model-specific details.

Pre-installation tips

  • All installation, regulation and adaptation to other types of gas must be carried out by an authorised installation technician, respecting all applicable regulations, standards and the country's electrical and gas supply companies' specifications.
  • Ensure that the plug of the unit can be connected to a nearby power socket to enable ignition.
  • Before installing the appliance, check that it is suitable for the type of gas (Natural Gas, LPG) you are using. If you need to change the gas type for the hob, please use the installation instructions on how to do this.
  • All our gas hobs come with factory fitted rubber seals for installation. Sealing with silicone gel is not advised.
    In accordance with regulations, the appliance should be installed in a well-ventilated area so that combustible gases can disperse over time.
    For safety reasons, the gas supply hose should not be placed near movable objects, to avoid dislodgement.

Spatial requirements

Measurements indicated are for reference purpose. Refer to instruction manual for measurements specific to the appliance model.