Check that there are no kinks in the cold water fill hose and the waste water hose by pulling the appliance out slightly and untwisting any visable kinks or bends in these hoses. For more information on how to correctly install these two hoses, click the link below.

Also ensure that the waste water hose is not blocked by removing the waste water hose from the siphon connection, putting the end of the hose in a bucket and selecting the drain programme. If there is a blockage, water will not fill, or struggle to fill, the bucket. If a blockage is found, clean the waste water hose and siphon.

Check the water pressure

To check the water pressure, simply follow the instructions below.

  • Place a bucket under the water tap.
  • Run the water. Approximately 10 litres of water per minute should come out.
  • If the water pressure is too low, less water will be discharged.
  • If this is the case, please contact your plumber who will be able to resolve the issue.
Contact Us

Do you need further help and support? Our customer service team will be able to provide the help you need.

Repair Service

Need to book a repair? Not a problem. We can arrange for an engineer to repair your appliance, both in and out of warranty.

User Manuals

If you need any help and support that is specific to your Bosch appliance model, your user manual is the best place to find this information.

Bosch Store

Search for original spare parts and buy tested and approved accessories and care products for your Bosch appliances in the Bosch store.