Flat duct 90 ° vertical LHEZ9VDSB2 • 17005034
1 / 2
Flat duct 90 ° vertical LHEZ9VDSB2 • 17005034
In case you click on the "Visit retailer's store" button your purchase process will be followed. See the data protection clause. By using the "Visit Retailer Store" key you accept the tracking of your purchase.
Find a local Dealer
Find a local dealer in your vicinity
Check appliance compatibility
How to find your E-Number
The model number (E-number) is located on the type plate of your device.
Technical Overview
Product group for which the accessory is available
Cooking and baking
Special Features
Vertical 90° bend with large radius for ducting behind the backpanel/furniture (designed for a 70cm worktop depth)
90° flat duct bend component (male) in vertical configuration with wide radius
Aerodynamically optimised design to minimise pressure loss and maximise air flow rate. Easy-to-cut & easy-to-connect via the female connector sleeve element.
The element complies with the Needle Flame Test (according to IEC 60695-11-5) & the V2 flammability class (according to UL94).
Specifications
Vertical 90° bend with large radius for ducting behind the backpanel/furniture (designed for a 70cm worktop depth)
90° flat duct bend component (male) in vertical configuration with wide radius
Aerodynamically optimised design to minimise pressure loss and maximise air flow rate. Easy-to-cut & easy-to-connect via the female connector sleeve element.
The element complies with the Needle Flame Test (according to IEC 60695-11-5) & the V2 flammability class (according to UL94).
Similar products
Manual and Documents
Flat duct 90 ° vertical LHEZ9VDSB2 • 17005034
In case you click on the "Visit retailer's store" button your purchase process will be followed. See the data protection clause. By using the "Visit Retailer Store" key you accept the tracking of your purchase.
Find a local Dealer
Find a local dealer in your vicinity